I had a call, today, from an owner 2004 Baron) who says the floor is getting soft around the drain holes.

My suggestion is, since the mat covers everything anyway, Go to a sheet-metal fabricating shop and get four 12 gauge plates (pieces) of stainless steel (BEST) or galvanized (OK) metal with holes matching the drain hole locations. Place one on the floor and one beneath the floor at each drain hole. Use 1/4 x 2" "carriage bolts" , one in the corner of each plate, with washers and lock washers on the piece under the floor.

Before you attache the top plate to above the floor, apply silicone caulk (aka silicone for kitchen, or bath, or windows) using a caulking gun around the hole and the perimeter of the plate. You can buy this stuff at any hardware store or Lowes/Home Depot.

If you are not a do-it-yourself'er, either ask the sheetmetal show if they will do it, or call around to body shops. Many auto mechanics will put it together if you get the components. 

Make a note: Clean the bedding out of the trailer if it gets wet. Keep the windows and back door closed when in storage. 

Happy Trails!

Jeff
570-401-4843
Jeff@KurtzInPA.com

I talked to Rita last week and I think these folks will do a good job for us.

Soon I will start a BrenderHelp newsletter with tips on maintenance and such.   Email me at Jeff@KurtzInPA.com to get on the newsletter mailing list.

Jeff

~~~~~~~~~

Received:

Hi Jeff, we will be taking over for Jay Martin to sell Brenderup parts here in the USA. We have been selling Brenderup Trailers since 1998 and know them well. If you need anything for your Brenderup, feel free to contact us by phone or email. We are just starting out so please have patience as we are waiting for our first parts to arrive.
Andy

--
Rita and Andy Kaulbach
Mountain Top Trailer Sales
454 West Main St
Tilton, NH 03276
1-603-494-9787 Andy
1-603-493-8057 Rita
www.mountaintoptrailers.com

Email:    mtts@tds.net


~~~~~~~~~~~~~~~~~~~~~

May 7th:  Recent issues:  

 - Two people are looking for suggestions on replacing or reinforcing the floor where it has rotted around the bolts.  Will be experimenting with solutions on Saturday.

My Baron was filling with water in the tack compartment when ti rains or when we wash it.   I drilled drain holes right inside each door to help with drainage.

- Replacing the cylinders which assist with lowering the tailgate:   Will investigate this weekend.

If you haven't already, you should frequently apply oil / WD-40 to the spaces in the tailgate hinge...   Urine is pretty potent stuff and anything you can do to help keep the shaft of that huge hings from corroding is certain to help.

If you have questions or solutions, or know of a dealer that assists with Brenderup trailers please post the info or email to me at Jeff@KurtzInPA.com .   If you just need to talk I answer at 570-401-4843.

Happy Trails,
Jeff
~~~~~~~~

For Brenderup Trailer repairs in TX:

A S A P Trailer Service & Supply

16330 Fm 2920 Rd, Tomball, TX 77377

281-351-7855
Ask for David Stine, and Please mention www.BrenderHelp.comThey are working on parts supplies with us.

May 2, 2012:   We are working on new contact information for an importer of Brenderup Parts.   Please send an email to me at Jeff@KurtzinPA.com with your Brenderup issues and I will see if I can source an answer for you.

If you know of a trailer dealer who will work on Brenderup Trailers we welcome that information being posted or emailed for distribution also.  

Happy Trailering!

Jeff