-------- Original Message --------
Subject: Brenderup Partition Bent
From: Catherine
Date: Sun, July 13, 2014 10:17 am
To: "Jeff@KurtzInPA.com" <Jeff@KurtzInPA.com>
Hello Jeff,
I have a Benderup Baron 2004 ( I think). The partition has bent. The top bar is bent, the welding of the steel that supports the plastic has severed at the back and the pin that holds the front vertical into the floor has snapped. The only thing holding the partition together is the fiberglass. The trailer wasn't in an accident.
Do you think this repairable or do I need a new partition.? I think the bottom bar could be re welded but am not sure about the bottom pin.
Answer: I think you can take it to a MACHINE shop and as what they think. Can you send photos?
A welding shop can probably do a fine job, but a place that calls themselves a MACHINE shop will likely do better work, although it may cost a bit more.
They will need to see the partition in the trailer so that they can keep things aligned when they do the welding.
This should be a simple thing to have repaired.
Please send before and after pics. and Thank YOU for asking!
Jeff Kurtz
www.Brenderhelp.com
717-620-9676
No comments:
Post a Comment