This is a blog boing back several years to when Brenderup Quit manufacturing in the USA. Scroll down to look through articles that may be helpful. Call me any time with questions. Jeff Kurtz, 717-620-9676

Tuesday, June 27, 2017

Gas Springs available in SK Canada

REposting info about gas struts with an update from today:


From April R, 6/27/17:

"I wanted to give you an update on the Gas struts source.  I just ordered them from Andy, which was a mistake because he is marking them up over 30% to $95 each, so the better source is definitely LS Technologies, even if you have to pay a bit more in shipping."

Prior POST:  This just in from Kathy M in Alberta AB:
"I just wanted to let you know that the gas springs are available from LS Technologies in Saskatoon, SK Canada. 
The originals on my 2007 Prestige were Stabilus Lift-O-Mat 7907RV (1500N force, 607mm extended length, 245 mm stroke), and the Stabilus dealer in Calgary wanted $440.50 EACH (not a typo!), with a 17 week waiting period.  I attached the spec sheet, as an FYI.
LS Technologies was able to build and supply me the next day with a pair that had all the same specs for Cdn$140.00 for the pair  They will ship throughout Canada and the US, and are familiar with the Brenderup trailers, as they regularly supply customers in the US.  (Prices may have changed since I got them several months ago!)
I found out when I went to install the springs that the originals were installed under a slight load (i.e. compressed.)  What I ended up doing was putting the top of the spring on the trailer, and then used the scissor jack from my vehicle placed on a board on the ground to lift the bottom end of the spring until it was level with the ball attachment on the trailer, and then just tapped the board over so that the spring socket slipped on to the ball.
Here is the website:
 
http://lstechnologies.ca/contact/

The phone is 888-878-0837, and email is info@lstechnologies.ca
lstechnologies.ca
LS Technologies specializes in the supply of Gas Springs, stainless steel gas springs, mounting hardware and linear actuators.
Here;s the drawing:  https://www.dropbGas 'strut Details  

Thanks!

KM
Calgary, AB

5 comments:

  1. I have an extra pair of struts due to a mix up that was entirely my fault. These can be installed on a Brenderup Royal TC or probably any other Brenderup...they have a bit less pressure so if you have taken off your storm door these would work perfectly. Specs: L510/T10-14-255-610-1300N 24 inch length. Send me an email if you are interested: still in the box $100 plus $25 for shipping. This is the price from LST(no mark up). karenleighbaker@att.net

    ReplyDelete
  2. I am looking for two gas springs for my prestige brenderup trailer 2000. Recently the seals must have gone and there is no lift at all. Milly Back

    ReplyDelete
  3. Positive site, where did u come up with the information on this posting? I'm pleased I discovered it though, ill be checking back soon to find out what additional posts you include. die springs

    ReplyDelete
  4. Yes, LST Gas Springs is a good reliable supplier and manufacturer of Gas springs, we have many years cooperation relationship,we are the premier supplier of precision steel tube for making gas springs in China.
    Taian Henson Metal Co Ltd
    info@tahenson.com
    hsma@tahenson.com
    whatsapp 008613853842286

    ReplyDelete
  5. LS Technologies has no relation to Taian Henson Metal Co Ltd.
    LS Technologies does not source products from china.

    ReplyDelete