Sunday, January 6, 2013
1/6/13:
I own a Brenderup solo, and I have a silly question. How do you replace the interior bulb at the back of the trailer? I can turn the housing but it doesn't come off. Also, you suggest greasing the THREE in the braking system. What is the THREE?
Answer:
The bulbs are same as used in AUDI and Mercedes automobiles. Any autoparts store has them. They are shaped like a torpedo with a contact on each end.
The light fixture covers are a pain to deal with, but you have to rotate it till some tabs line up and the cover comes off.
They seem to be problems all the time so I am going to replace them with LED's. Even battery operated and attached with velcro would be easy. Will post pics when I get that far.
There are two grease fittings on the tip side of the hitch which are very obvious. look underneath where the brake lever pivots and there is one there pointing upward.
Happy Trails! Jeff
-------- Original Message --------
Subject: Brenderup question
From: Jane Rodrigue <jane_rodrigue@yahoo.com>
Date: Fri, January 04, 2013 10:47 pm
To: "jeff@kurtzinpa.com" <jeff@kurtzinpa.com>
I own a Brenderup solo, and I have a silly question. How do you replace the interior bulb at the back of the trailer? I can turn the housing but it doesn't come off. Also, you suggest greasing the THREE in the braking system. What is the THREE?
Subscribe to:
Post Comments (Atom)
Hello All! So excited, finally found a Brenderup for myself. A Royal TC. Have a question about how to remove the middle divider. It looks simple enough, but I'm having a problem. I slide the handle bar up and out, no problem, and the divider is now disengaged from the front chest bar. But when I go to pull the divider up from the floor it moves only a small amount both stopping with a major resistance. Is there something else I must release somewhere? Thank you, Michelle Slaughter - Lyons, CO
ReplyDelete