This just in from Andy: horsetrailerparts@gmail.com
Hi Jeff, can you please change my email on your blog to:
I will be phasing this email out soon.
Thanks, Andy
--
Listed in: Ring, Track & Field - Trailers for Sale2005 Brenderup Baron TC 2 horse trailer for sale
$7,500.00
Date Added: 7/12/2014 Posted By: Mary Blair 870 N. Livingston St. [ MAP ] Arlington, VA 22205 Email Address: mnblair@juno.com Phone: 703-241-5765 2005 Brenderup Baron TC. This trailer is very easy to tow. You do not need a big vehicle to tow this. Weighs 1900 pounds. Has its own braking system (no brake controller needed). Adjustable butt bars, for different size horses. Handles horses up to 17 hands (had a Clydesdale in it a few times). Steel kick plates inside, if horses get feisty. Tack room, where top goes up so you can stand it it, if you need to make a wardrobe change at a show (horses have to be out to put top up). Has 2 saddle racks, 2 bridle racks, and a blanket pole in tack room. Ramp is long enough for a horse to totally stand on it. Has stabilizer bars on either side, to stabilize ramp, for heavier horses (or horses skittish with ramps). Hydraulic lifts on ramp to help you close it. Front window horses can see out of. Side windows that adjust to partially open, or fully open. Head divider so horses cannot pick at each other inside. Two lead rope ties on either side. Uses regular car tires, so not as expensive as truck tires. Comes with hay bags, feed buckets, trailer ties, Trailer Aid tire ramp and 2-ton jack, so you are ready to go as soon as you register it. It has just passed inspection. I had a bad fall last year and had back surgery, and cannot ride anymore, so trailer and accessories must go. This was my first trailer ever, and I had a blast with it going to various state and national parks. Very easy to use. $7,500 or best offer. ~~~~~~~~~~~~~~~~~~~~~ 07/18/14
|
-------- Original Message --------
Subject: Brenderup Partition Bent
From: Catherine
Date: Sun, July 13, 2014 10:17 am
To: "Jeff@KurtzInPA.com" <Jeff@KurtzInPA.com>
Hello Jeff,
I have a Benderup Baron 2004 ( I think). The partition has bent. The top bar is bent, the welding of the steel that supports the plastic has severed at the back and the pin that holds the front vertical into the floor has snapped. The only thing holding the partition together is the fiberglass. The trailer wasn't in an accident.
Do you think this repairable or do I need a new partition.? I think the bottom bar could be re welded but am not sure about the bottom pin.